The smart UV curing lamp for Duobond UV resin Impact-Filler

This UV LED lamp, is an alternative to the traditional UV tube light. It can adapt to most common powersuplies and so operates between 6V and 12V. With the tripod setting combined with the suction caps it is always fixed on the windshield with the correct distance in relation to the beam angle of the special Duobond LED.

Optimal curing

The wavelength and amount of UV radiation required for the Duobond UV resin and Impact filler were the starting point for the development of this UV lamp. The required low wavelength and an optimal design of the power supply on the printed circuit board prevent any form of heat production. Heat production has a negative influence on the refractive index and the quality of the cured UV resin. This makes the repair more visible and reduces the shear strength of the repair, increasing the chance of the glass cracking as an unwanted result. Additionally, heat reduces the lifespan of a printed circuit board itself. The additional built-in green LED provides a clearly visible warning when the UV LED lamp is on. The green LED flashes every ten seconds and once the optimal curing time has elapsed, the lamp switches off automatically. This limits the required amount of energy used each time the IQ-r lamp is used. This LED UV lamp is supplied with an adapter cable, so that it can be connected to, for example, the cigarette lighter or transformer with an optional cable of your choice.